Monthly Archives: March 2017

This Week: Aluminum Upcycled at ASEH in Chicago

chicago.green.river

The Chicago River may not be green by the start of the conference, but we will discuss green design strategies March 30.

The American Society for Environmental History meeting is in Chicago (the Drake Hotel, to be precise) this week, and I will discuss my new book Aluminum Upcycled in two sessions on Thursday. (The book will be available at the book exhibit and can also be purchased from Johns Hopkins University Press’s website.)

At 8:30am, Thursday March 30, I will be part of a panel on “Histories of Design and the Environment” with Kjetil Fallan, Rachel S. Gross, and Eun-Joo Ahn. We will all present individual papers, and then Steven Corey will comment and moderate.

Immediately thereafter at 10:30am, I will be part of a Critical Discard Studies and Environmental History roundtable organized by Martin Melosi. I will discuss aspects of the book in both sessions, with a focus on Herman Miller’s furniture design in the first and a broader discussion of where the book fits in the literature in the second.

On the Radio with Mike Nowak Saturday @ 10:15am WCGO-AM 1590 Chicago

radio_pic.jpgWith ASEH bringing me back to Chicago this year, my good friend Mike Nowak has generously invited me back for a return appearance on Chicago’s longest-running environmental radio show on April 1. The Mike Nowak Show airs every Saturday from 10am-noon CT on WCGO-AM 1590 and listeners outside the Chicago metropolitan area can listen live at the link or click through later to hear the show as a podcast.

I’ll be on starting at 10:15, and we will likely talk about my new book Aluminum Upcycled, which I’ll bring to the Chicago Humanities Festival on April 29. Based on past experience, it is quite possible Mike and I will discuss the state of recycling and waste management in Chicago.

Aluminum Upcycled Book Event in Brooklyn Saturday 1:30pm

zimringpostedI will discuss my book Aluminum Upcycled: Sustainable Design in Historical Perspective (available now) at Pratt’s Sustainability Crash Course in Brooklyn Saturday afternoon March 25 from 1:30-2:20pm. 

The Sustainability Crash Course runs from 9am to 5pm with a variety of talks and events at Pratt’s Brooklyn campus (200 Willoughby Avenue near the Clinton-Washington C station and the Classon G station). My book launch will be in Pratt’s Engineering Building at 1:30pm and last about 50 minutes. The event is free, but registration is required.

I will have copies of the book for sale ($30 cash or check, a discount from the $39.95 list price) at the event. Johns Hopkins University Press describes my history of sustainable design strategies this way:

Beginning in 1886 with the discovery of how to mass produce aluminum, the book examines the essential part the metal played in early aviation and the world wars, as well as the troubling expansion of aluminum as a material of mass disposal. Recognizing that scrap aluminum was as good as virgin material and much more affordable than newly engineered metal, designers in the postwar era used aluminum to manufacture highly prized artifacts. Zimring takes us on a tour of post-1940s design, examining the use of aluminum in cars, trucks, airplanes, furniture, and musical instruments from 1945 to 2015. 

By viewing upcycling through the lens of one material, Zimring deepens our understanding of the history of recycling in industrial society. He also provides a historical perspective on contemporary sustainable design practices. Along the way, he challenges common assumptions about upcycling’s merits and adds a new dimension to recycling as a form of environmental absolution for the waste-related sins of the modern world. Raising fascinating questions of consumption, environment, and desire,  Upcycling Aluminum is for anyone interested in industrial and environmental history, discard studies, engineering, product design, music history, or antiques.

H-Environment Roundtable on Race and the Environment

This week, H-Environment published a roundtable double review of Carolyn Finney’s Black Faces, White Spaces and my Clean and White, featuring comments from Mary E. Mendoza, Kathryn Morse, Richard M. Mizelle, Jr., and Traci Brynne Voyles, and responses by both authors. The link opens the 38-page PDF.

Thanks to all of the participants for such an engaging discussion, and to editor Christopher F. Jones for organizing this ambitious double roundtable.

Aluminum Upcycled Brooklyn Book Launch Saturday at 1:30pm

zimringpostedI will discuss my book Aluminum Upcycled: Sustainable Design in Historical Perspective (available now) at Pratt’s Sustainability Crash Course in Brooklyn this Saturday afternoon (March 25). 

The Sustainability Crash Course runs from 9am to 5pm with a variety of talks and events at Pratt’s Brooklyn campus (200 Willoughby Avenue near the Clinton-Washington C station and the Classon G station). My book launch will be in Pratt’s Engineering Building at 1:30pm and last about 50 minutes. The event is free, but registration is required.

I will have copies of the book for sale at the event. Johns Hopkins University Press describes this history of sustainable design strategies this way:

Beginning in 1886 with the discovery of how to mass produce aluminum, the book examines the essential part the metal played in early aviation and the world wars, as well as the troubling expansion of aluminum as a material of mass disposal. Recognizing that scrap aluminum was as good as virgin material and much more affordable than newly engineered metal, designers in the postwar era used aluminum to manufacture highly prized artifacts. Zimring takes us on a tour of post-1940s design, examining the use of aluminum in cars, trucks, airplanes, furniture, and musical instruments from 1945 to 2015. 

By viewing upcycling through the lens of one material, Zimring deepens our understanding of the history of recycling in industrial society. He also provides a historical perspective on contemporary sustainable design practices. Along the way, he challenges common assumptions about upcycling’s merits and adds a new dimension to recycling as a form of environmental absolution for the waste-related sins of the modern world. Raising fascinating questions of consumption, environment, and desire,  Upcycling Aluminum is for anyone interested in industrial and environmental history, discard studies, engineering, product design, music history, or antiques.

Aluminum Upcycled Book Talk & Signing in Brooklyn Mar. 25 1:30pm.

zimringpostedI will discuss my book Aluminum Upcycled: Sustainable Design in Historical Perspective (available now) at Pratt’s Sustainability Crash Course in Brooklyn Saturday afternoon March 25 from 1:30-2:20pm. 

The Sustainability Crash Course runs from 9am to 5pm with a variety of talks and events at Pratt’s Brooklyn campus (200 Willoughby Avenue near the Clinton-Washington C station and the Classon G station). My book launch will be in Pratt’s Engineering Building at 1:30pm and last about 50 minutes. The event is free, but registration is required.

I will have copies of the book for sale ($30 cash or check, a discount from the $39.95 list price) at the event. Johns Hopkins University Press describes my history of sustainable design strategies this way:

Beginning in 1886 with the discovery of how to mass produce aluminum, the book examines the essential part the metal played in early aviation and the world wars, as well as the troubling expansion of aluminum as a material of mass disposal. Recognizing that scrap aluminum was as good as virgin material and much more affordable than newly engineered metal, designers in the postwar era used aluminum to manufacture highly prized artifacts. Zimring takes us on a tour of post-1940s design, examining the use of aluminum in cars, trucks, airplanes, furniture, and musical instruments from 1945 to 2015. 

By viewing upcycling through the lens of one material, Zimring deepens our understanding of the history of recycling in industrial society. He also provides a historical perspective on contemporary sustainable design practices. Along the way, he challenges common assumptions about upcycling’s merits and adds a new dimension to recycling as a form of environmental absolution for the waste-related sins of the modern world. Raising fascinating questions of consumption, environment, and desire,  Upcycling Aluminum is for anyone interested in industrial and environmental history, discard studies, engineering, product design, music history, or antiques.